First let’s define the basic types of sinks: Flush bill and kitchen sinks.
Overhead kitchen sinks sold in the event that you separate kitchen. Then sink mounted on a special pedestal without tops – podstolya. For the corner sink and overhead cabinets are special.
If you have a desire to fix the sink without tables – fix it on the wall with brackets. Just keep in mind that a lot of weight such sinks can not survive. Spend first marking on the desired height from the floor (usually 80-90 cm). A second partition just below the first (on the wall thickness of the shell back) – Get line mounting brackets. Measure the distance between them, mark on the wall, drill a hole, score a dowels, screwed brackets, attach the sink. Voila! Kitchen sink in the right place! Check out: washing should not be loose and move!
Set the washer on the curb invoice? It will go much faster, lay down on the sink cabinet, connect the plumbing and everything!
Mortise kitchen sinks have the shape and size are strictly comply with the recess in the worktop. Buying kitchen sink, look in the papers, there should be the minimum size countertops. Mortice kitchen sinks are mounted by means of special clamps. At the request edge of a sink or a little above the top, or is on par with it. Sometimes set below the tabletop.
As fixed Mortice kitchen sinks?
Pre-shoot countertop and sink with the location determined: the angular, straight. Sometimes manufacturers make washing pattern. Then you’re just tracing it on the table. If the pattern is not, then puts the sink to the table and tracing clearly on edge. From the line of retreat by 1 – 1.5 cm draw another path. Jigsaw cut out the hole, cut and process thoroughly cleans the sealant. The more responsible you treat to treatment, the greater the assurance that no water gets inside the tabletop.
Allow time for sealant to harden, then place the countertop in place and fasten. “But what about kitchen sink?” – You ask! Now you need to handle the very sink or silicone adhesive sealant, which can be bundled with a sink. The edges of the sink thoroughly promazyvayut silicone (the back) or kleite tape. The closer to the edge of the sink – the better. Now in the opening set sink. Squeeze the clamps or special fasteners and leave it to stick on. And then install sinks, faucets and other necessary things. Now you know how to install kitchen sink!